Product Model: SBT-40
Rated Voltage: 220V
Tank capacity: 30L
Rated power: 100W
Wind speed: Three gears adjustment
Rated frequency: 50Hz
Control mode: Remote control, mechanical
Product size: 480×350×850mm
| Product Model | SBT-40 |
| Rated Voltage | 220V |
| Tank capacity | 30L |
| Rated power | 100W |
| Wind speed | Three gears adjustment |
| Rated frequency | 50Hz |
| Control mode | Remote control, mechanical |
| Product size | 480×350×850mm |
Third speed / Rapid cooling / Wide-angle air supply / 30L large water tank / Cool ice curtain / Energy saving / Intelligent remote control / Intelligent timing
Three-speed wind mode is optional, an intimate new summer experience, worthy of favor
The water tank is larger and can be cooled continuously for a long time, 2 *15L bottles of water.
Increase the ice crystal, with cooling cooling effect cooler, more cool summer.
Blow new upgrade, intimate summer new experience, worthy of favor, Bedroom/Living room/Dining room.
Less bending, less effort, with the innovative top fill.
Less than a dollar a day, Calculated in 10 hours a day, electricity consumption is about 1 degree a day
As a common air cooling solution, blue evaporative cooling pads are widely used in various places, including industrial plants, greenhouses, commercial buildings, etc. Its working principle is based o...
READ MOREEvaporative Cooler Pads are a key component of evaporative coolers that effectively absorb moisture and reduce air temperature through evaporation. To ensure optimal performance and extend their lifes...
READ MOREEvaporative cooling:When the Evaporative Air Cooler with Cooling Pad is activated, the spray water system will spray water evenly on the 3D honeycomb cooling pad. This water forms a thin film of water...
READ MOREDesign of the 30L water tank of Evaporative Air Cooler Chiller
1. Water tank capacity
Capacity suitability: The 30L capacity is designed to meet the needs of daily use, ensuring continuous cooling effect in high temperature environment while avoiding the trouble of frequent water addition.
2. Water flow
Water flow design: The flow path is designed inside the water tank to ensure that the water is evenly distributed in the cooling pad and avoid dead corners, thereby improving cooling efficiency.
Circulation system: Equipped with a water pump or gravity circulation design to ensure that the water keeps flowing in the cooling pad and enhances the evaporation effect.
3. Material selection
Anti-corrosion material: The water tank is made of corrosion-resistant materials to prevent rust or decay after long-term use.
Antibacterial treatment: Antibacterial ingredients are added to the material to reduce the growth of bacteria in the water and keep the water clean.
4. Cleaning and maintenance
Detachable design: The water tank can be designed as a detachable structure, which is convenient for users to clean it regularly and avoid the accumulation of scale and dirt.
Cleaning port: A cleaning port or drain port is provided to facilitate users to quickly empty the water tank for deep cleaning when needed.
5. Water level monitoring
Water level indicator: Equipped with a water level indicator to monitor the water level in real time, prevent overfilling or water shortage, and ensure effective use of water.
Automatic water replenishment function: If conditions permit, an automatic water replenishment system can be designed to ensure that the water tank is kept at an appropriate water level.
6. Anti-pollution design
Sealing: The water tank design must have good sealing to prevent external pollutants from entering and reduce the risk of water quality deterioration.
Filtration system: A filter is set at the water inlet to prevent large particles of impurities from entering the water tank and keep the water clean.
If you are interested in our products, please consult us
CONTACT US
EN 
English
中文简体
عربى
Tiếng Việt